Configuration - Honeywell CENTRA LINE IF-LON Instructions De Montage

IF-LON – MOUNTING INSTRUCTIONS
Mounting
The IF-LON Interface is suitable for DIN rail mounting.
DIN Rail Mounting
A DIN rail mounting bracket (see Fig. 2) can be used to
mount the IF-LON Interface onto a DIN rail.
After attaching the bracket to the back of the IF-LON Interface
(using two PZ2 screws for plastic, included), the device can
be simply clicked onto the DIN rail.
Fig. 2. Bracket for DIN rail mounting

Configuration

The IF-LON Interface is supplied with the following pre-
settings:
Transceiver ID: TP/FT-10
Automatic Flush Cancel:
Table 2. Technical specifications
term
Bus interface USB-conform as per USB specification 1.1, 12
Mbit/sec
Network interface
EIA 709-conform,
Operating temperature +0 °C to +70 °C
Storage temperature -45 °C to +85 °C
Max. humidity 90% at +50 °C, non-condensing
Listings CE mark and FCC mark
Manufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Technologies Sàrl, Rolle, Z.A. La Pièce 16, Switzerland by its Authorized Representative:
CentraLine
Honeywell GmbH
Böblinger Strasse 17
71101 Schönaich, Germany
Tel. +49 7031 637 845
Fax +49 7031 637 740
info@centraline.com
www.centraline.com
66
Box checked
remarks
TP/FT-10
CentraLine
Honeywell Control Systems Ltd.
Arlington Business Park
UK-Bracknell, Berkshire RG12 1EB
Phone: +44 13 44 656 565
Fax: +44 13 44 656 563
info-uk@centraline.com
www.centraline.com
3.5
Printed in Germany.
Subject to change without
notice.
MU1Z-0974GE51 R0913