Listening To Radio; Setting Mono/Stereo; Presetting Stations - Samsung HT-D4200 Mode D'emploi

2. In Stop mode, connect the USB storage
device to the USB port on the front panel of
the product.
My Contents
My Devices
Function
3. Press the ENTER button.
4. Press the ▲▼◄► buttons to select the
desired Videos, Music or Photos, then press
the ENTER button.
5. For playing back Video, Music or Photo fi les,
refer to pages 40~48.
✎
NOTE

You must remove the USB storage device safely
(by performing the "Safely Remove USB" function)
in order to prevent a possible damage to the USB
memory. Press the MENU button to move to the
home menu, and select the YELLOW(C) button
and press the ENTER button.

If you open the tray when playing USB storage
device, the device mode is changed to "BD/DVD"
automatically.
HT-D4200_ELS_1223.indd 49 HT-D4200_ELS_1223.indd 49
Videos
Connected Device
Photos
USB
Music
Internet Settings
" Enter ' Return
c Safely Remove USB d WPS(PBC)

Listening to Radio

Using buttons on the Remote Control
1. Press the FUNCTION button to select FM.
2. Tune in to the desired station.
•
Preset Tuning 1 : You must fi rst add a desired
frequency as a preset. Press the STOP ()
button to select PRESET and then press the
TUNING/CH ( ) button to select the preset
station.
•
Manual Tuning : Press the STOP () button to
select MANUAL and then press the TUNING/
CH ( ) button to tune in to a lower or higher
frequency.
•
Automatic Tuning : Press the STOP () button
to select MANUAL and then press and hold the
TUNING/CH ( ) button to automatically
search the band.

Setting Mono/Stereo

Press the MO/ST button.
•
Each time the button is pressed, the
sound switches between STEREO and
MONO.
•
In a poor reception area, select MONO
for a clear, interference-free broadcast.

Presetting Stations

Example : Presetting FM 89.10 into memory
1. Press the FUNCTION button to select FM.
Press the TUNING/CH (
2.
<89.10>.
3. Press the TUNER MEMORY button.
•
NUMBER fl ashes on the display.
4. Press the TUNER MEMORY button
again.
•
Press the TUNER MEMORY button
before NUMBER disappears from the
display.
•
NUMBER disappears from the display and
the station is stored in memory.
5. To preset another station, repeat steps 2 to 4.
•
To tune in to a preset station, press the
TUNING/CH ( ) button to select a
channel.
) button to select
TUNER
MEMORY
C
49
English
2011-12-23 2011-12-23 2:07:36 2:07:36