EnglisH
1
Problem
The
temperature
cannot be set.
Smoke
escapes when
I open the
clip.
Possible cause
The appliance switched
off automatically after
having been on for 1
hour.
The appliance is
not suitable for the
voltage to which it is
connected.
The mains cord of the
appliance is damaged.
You have activated the
temperature lock.
In some climates and
surroundings, the air
contains more
moisture than in
others. The heat of the
curler causes moisture
that is naturally present
in the surrounding air
to evaporate.
Solution
Set the on/off slide to '0' and
then to 'I' again to switch the
appliance off and on again
Make sure that the voltage
indicated on the appliance
corresponds to the local
mains voltage.
If the mains cord is damaged,
you must have it replaced by
Philips, a service centre
authorised by Philips or
similarly qualiied persons in
order to avoid a hazard.
Press and hold the
temperature decrease/lock
button for a few seconds
until the lock symbol
disappears from the display.
This is normal and harmless.