Putting Into Operation; Operation Modes Of The D4 Office - Funkwerk D4 Office Manuel D'utilisation

Putting into operation

Putting into operation

Operation modes of the D4 Office

The D4 Office provides the following operation modes
Operation without MEM Card
All settings and all log-in information for the operation of a handset
D4 Office with a system-compatible telecommunications system (PABX)
– like an Integral 55 or a GAP system – will be stored in the memory of
the handset.
The handset D4 Office may successively be logged in to several sys-
tem-compatible telecommunications systems. For example, it may be
logged in to telecommunications systems at different locations of a
plant. From now on, the user of the D4 Office can select one of the sys-
tems to which his handset has been logged in according to his needs.
At a time, the D4 Office can only be used with one of the telecommuni-
cations systems.
Operation with a MEM Card from a handset type D3 or FC1
In this operation mode the D4 Office is equipped with a MEM card from
a DECT™ handset D3 or FC1, which already has been logged in to a
telecommunications system in the past.
The D4 Office will use the log-in information that is stored on the MEM
card. Furthermore the D4 Office will copy the telephone-book entries
from the MEM card into its own memory.
The D4 Office will never write back any information from its own me-
mory into the D3 or FC1 MEM card.
During operation with a MEM Card from a handset type D3 or FC1, the
D4 Office cannot be logged in to further system-compatible telecommu-
nications systems. See page 100.
All registrations of a D4 Office into telecommunications systems which
have been carried out in the past without any MEM card (see operation
mode without a MEM card) neither are visible nor accessible during
operation with a MEM Card from a handset type D3 or FC1. These
registrations are available after having removed the D3 or FC1 MEM
card from the D4 Office again.
96
D4 Office