LF Master Forge BG1795BAL Mode D'emploi page 20

NATURAL GAS CONVERSION
29. Use the 17 x 19 mm wrench (FF) to
remove the LP hose and regulator from
the manifold. Attach the Natural Gas
Hose (sold separately) and tighten it with
the wrench.
Hardware Used
17 x 19 mm Wrench
FF
10 ft. Natural Gas Hose
(Sold separately)
Leak Check
When checking for gas leaks, do not use an open flame. Use a soapy water solution and apply it
to the pipe joints and fittings with a brush and check for bubbles. Check flexible hoses for cuts
and wear that may affect the safe operation of the grill. Only use original equipment replacement
hoses. Use only replacement hose assemblies specified by manufacturer.
29
x 1
x 1
20
LP hose & Regulator
10 ft. Natural Gas Hose