LF Master Forge BG1795BAL Mode D'emploi page 19

NATURAL GAS CONVERSION
26. Re-install the burners. Make sure the
orifices are aligned with the burners and
the ignition pins are installed in their
original positions. Check for sparks
before operating your grill.
27. Put the flame tamers back in the
firebox, followed by the grids and
warming rack.
28. Remove the 7 main burner control
knobs by grasping and pulling out. Do
not remove the control knob for the
rotisserie burner. Insert the supplied
slotted screwdriver (DD) into the hole of
each main burner control valve stem as
shown. Rotate the stem
counterclockwise (to the left) as far as it
will go until it stops. The stem will now be
set in the NG position.
Reattach the control knobs.
Hardware Used
Slotted
DD
screwdriver
26
27
28.1
3
28.2
x 1
19
Warming
Rack
2
1
Grids
Flame
Tamer