LF Master Forge BG1795BAL Mode D'emploi page 17

NATURAL GAS CONVERSION
20. Remove the screw attaching the side
burner ignition pin to the side burner with
the Phillips head screwdriver (CC).
Hardware Used
Phillips Head
CC
Screwdriver
21. Loosen and remove the ignition with
the Phillips head screwdriver (CC).
Hardware Used
Phillips Head
CC
Screwdriver
22. Adjust the air shutters of main
burners and searing burner by loosening
the air shutter screws with the Phillips
screwdriver (CC).
Hardware Used
Phillips Head
CC
Screwdriver
20
x 1
21
x 1
22
x 1
17