LF Master Forge BG1795BAL Mode D'emploi page 10

ASSEMBLY INSTRUCTIONS
7. Insert the side burner grate (L) into the
holes located at side of the side burner.
8. Install the electric motor support (G) to
the left side of the firebox with 2 M5 x 25
screws, 2 spring washers, 2 flat washers
and 2 M5 nuts with the Philips head
screwdriver (DD).
Note: The M5 x 25 screws, spring washers,
flat washers and M5 nuts are packed with
the electric motor support (G).
Hardware Used
Phillips Head
CC
Screwdriver
9. Install the rotisserie support (I) to the
right side of the firebox using 2 M5 x 25
screws, 2 spring washers, 2 flat washers
and 2 M5 nuts.
Note: The M5 x 25 screws, spring washers,
flat washers and M5 nuts are packed with
the electric motor support (G).
Hardware Used
Phillips Head
CC
Screwdriver
M5X25
x 1
x 1
10
Spring Flat
弹垫 平垫
washer washer
M5 Nut
G
L
I