Maintenance; Maintenance Schedule - Greencut GLM880X Manuel D'utilisation

MAINTENANCE

• The engine must be turned off and cold enough to touch before performing any maintenance work.
• To keep the equipment performing at optimal efficiency, regular checks and maintenance is required. This will
ensure best performance of your machine and will extend the life of your product considerably.
• The maintenance program indicated below specifies certain preventive maintenance checks, necessary tasks and
how often they should be performed.
• Some maintenance indicated in this manual may be beyond the capacity of some users. Contact the Official
Technical Service for those procedures for which you do not feel comfortable doing or for which you do not have
the necessary tools or experience.
NOTE: Harsh operating environments such as extreme temperatures, dust, etc. may require
more frequent maintenance. Maintenance frequencies are based on general factors including a
maximum use of approximately 300 hours per year. Apply common-sense when following the
maintenance schedule based on your actual use of the product. Keep reasonable records of
maintenance activities for reference. Failure to follow the maintenance schedule, using incorrect or
non-compatible accessories or replacement parts, or general negligence may result in making the
product warranty void.

MAINTENANCE SCHEDULE

COMPONENT / TASK
Engine Oil
Oil Leaks
Air Cleaner
Spark Plug
Valve Clearance
Combustion Chamber
Idle Speed
Fasteners
Fuel Tank
Fuel Line
Fuel Filter
Fuel Strainer
FIRST MONTH
EVERY USE
OR 20H. USE
Check Replace
Check/repair as
necessary
Check
Check/tighten
as necessary
Check
EVERY 3 EVERY 6
MONTHS OR MONTHS OR
50H. USE 100H. USE
Replace
Clean and replace as necessary
Check Replace
Check/adjust as
necessary
Replace as necessary
Clean and replace as necessary
89
EN
EVERY YEAR OR
300H. USE
Adjust as
necessary
De-choke as
necessary
Flush and clean