Delivery Set - Vents D Manuel D'utilisation

Read the present user manual carefully before proceeding with installation works.
Compliance with the manual requirements ensures reliable operation and long service
EN
life of the product. Keep the user's manual available as long as you use the product.
You may need to re-read the information on the product servicing.

DELIVERY SET

The delivery set:
1. Fan - 1 item;
2. Screws and dowels - 4 items;
3. Plastic screwdriver - 1 item (only for the models with a timer);
4. User manual - 1 item;
5. Packing box.
SHORT DESCRPTION
The product described herein is an axial fan for exhaust ventilation of small and medium-sized products.
The fan is made of white plastic.
The fan may include a back valve to prevent air back drafting when the fan does not run.
The fan is designed for connection to Ø 100, 125 and 150 mm air ducts.
Due to constant improvements the design of some models may slightly differ from those ones described in
this manual.
OPERATION RULES
The fan is designed for connection to AC 220-240 V, 50 Hz power mains.
The model 12 is designed for connection to 12 V, 50 Hz power mains directly or to AC 220-240 V, 50 Hz
power mains through the step-down transformer, for example, TRF 220/12-25 (optional).
Air flow direction in the system must match the pointer direction on the fan casing.
Ingress protection rating against access to hazardous parts and water ingress:
IP24 - X, X1, Xstar series
IP34 - D, D1, S, S1, LD, LD1, LD light, LD Fresh time, Cosmo, Modern, Techno, Domino
The fan is rated for operation at the ambient temperature ranging from +1°C up to +45°C.
The fan requires no grounding.
4