Manufacturer's Warranty - Vents D Manuel D'utilisation

EN
MAINTENANCE
The product surfaces must be regularly cleaned from dirt and dust. Cut off power supply prior to any
maintenance operations, see step 1.1. Remove the front cover following step 2.1-2.7 depending on a model
type), clean the fan as in fig. 2 and cover the fan following step 5.1-5.7 depending on a model. Connect the
fan to power supply, step 6.1. For cleaning use a soft cloth or brush and mild detergent water solution.
Avoid water dripping on the electric components. Wipe the surfaces dry after cleaning.
STORAGE REGULATIONS
Transport the product by any transportation vehicle in the manufacturer's original package.
Store the delivered product in the manufacturer's original packing box in a dry ventilated premise with the
0 0
temperature range from +5 C up to + 40 C and relative humidity less than 80%.
The storage environment must not contain dust, acid or alkali vapours that may cause corrosion of the
product parts.

MANUFACTURER'S WARRANTY

The fan is manufactured at the factory of "Ventilation systems" PrJSC (hereinafter referred to as the
Manufacturer).
By purchasing this product the customer confirms to have read and agreed to the terms, rules and
requirements related to operation, storage, transportation, mounting, adjustment, connection, maintenance
and repair as well as warranty obligations with respect to this product as set forth in the manufacturer's
accompanying documentation to the product.
The manufacturing company sets forth the warranty period (service life) of the product as 24 months
following the sale date via retail network subject to the customer's ensuring compliance with the rules of
transportation, storage, mounting and operation of the product.
In case of any malfunction of the product through the fault of the Manufacturing company within the warranty
period (service life), the customer shall have the right to elimination of the manufacturing defects by means
of warranty servicing performed free of charge.
The warranty servicing implies performance of activities related to elimination of defects in the product aimed
to provide intended use of the product by the customer. The defects are eliminated either by replacing or
repairing such a product or a part (component) thereof.
7