Optika Italy B-1000 Série Manuel D'instructions page 8

Mount the stage: lower the
support using the coarse
focus knob, then place the
stage and firmly tighten the
lock screw. (Fig.7)
Screw each objective into the
thread of the nosepiece, in
order of magnification. (Fig.8)
Connect the cable to the
external power supply. (Fig.9)
Insert the power supply cable
for incident light. (Fig.10)
Insert the power supply jack
on the connector at the rear.
(Fig.11)
Page 8
Fig.7
Fig.8
Fig.9
Fig.10
Fig.11