Connect the water supply line to the refrigerator
There are several items you must purchase to complete this connection. You may find
these items sold as a kit at your local hardware store.
Copper Tubing
Plastic Tubing
01
02
03
1. Connect the household water line to the assembled compression fitting.
- If you are using copper tubing, slip the compression nut (B) (not supplied) and
ferrule (not supplied) on the copper tubing (not supplied) as shown.
- If you are using plastic tubing (A), insert the molded end (Bulb) of the plastic tubing
(A) into the compression fitting.
CAUTION
If you use plastic tubing, (A) do not use it without the molded end (Bulb).
2. Tighten the compression nut (B) onto the compression fitting. Do not over-tighten the
compression nut (B).
3. Turn the water on and check for any leakage. If you find water drops or leakage in
the connection areas, turn off the main water supply. Check the connections and, if
necessary, tighten.
Untitled-1 33
•
/
" copper tubing
1
4
•
/
" compression nut (1 pc)
1
4
• Ferrule (2 pc)
" plastic tubing Molded end (Bulb)
•
1
/
4
•
1
/
" compression nut (1pc)
4
A
04
05
06
07
08
B
A. Refrigerator
B. Household water supply line
01 Compression Nut (
/
1
02 Ferrule (Not supplied)
03 Copper tubing (Not supplied)
04 Plastic Tubing (Assembled)
05 Compression Fitting (Assembled)
06 Molded end (Bulb)
07 Compression nut (B) (
supplied)
08 Plastic Tubing (A) (Not supplied)
") (Assembled)
4
1
/
") (Not
4
English 33
2017-04-19
3:44:38