Installation
20
English
Untitled-1 20
6. Open the door 90 degrees. While
holding the door, pull up and remove
the top hinge. Be careful not to damage
the connector wires when you remove
the hinge.
7. Gently pull up the door vertically to
remove. Do not apply excessive force
to the door. The door may fall, causing
physical injury.
8. Lay the door down on a flat surface.
9. Repeat the steps above for the other
door, except for Step 3. There is no
water tube on the right side door.
2017-04-19
3:44:35