hestan KICS Manuel D'installation page 9

COOKTOP INSTALLATION
STEP 3
A foam tape is provided to seal the cooktop to the countertop. Apply tape to the underside of the
cooktop glass between the body of the cooktop and the inner edge of the metal frame.
There should be about 3/32" [2 mm] between the edge of the tape and the edge of the glass. Use
tape around the entire glass perimeter.
The tape will retain the cooktop and seal against leaks into the cabinet.
they meet with no gaps.
COOKTOP HOUSING
COOKTOP GLASS
METAL FRAME
STEP 4
Make a final check that all required clearances are met.
Feed the cable through the cabinet as needed. Insert the cooktop centered into the cutout opening.
Make sure the front edge of the cooktop is parallel to the countertop.
(CONT.)
Figure 7. Apply foam tape
Figure 8. Placing cooktop
Trim the tape ends so that
FOAM
TAPE
2 mm
©2019 Hestan Commercial Corporation
EN
7