HSM ProfiPack P425 Notice D'utilisation page 14

KHD Handels-GmbH - www.khd-kl.com - www.khd-handel.de - Fon +49 (0) 631 570 46 80 - Autorisierter HSM-Direkthändler
english
Perforating cardboard
1
Padding cardboard
2
Removing material residue
Remove material residue when changing from "Padding cardboard" to "Perforating
cardboard".
 Switch off the machine. Turn the main switch to position "0".
 Remove residual material on the pressing plate by hand.
 Push the lever down.
 Switch on the machine. Turn the main switch to position "I".
 Push in compact cardboard to order to clear the shaft of any residual material.
 Remove any remaining residual material by hand.
Switching the machine off
Turn the main switch to position "0".
14
 Push the lever (1) downwards.
 Feed in the cardboard.
 Release the locking bolt (1).
1
 Pull lever (2) upwards.
 Insert at least 2–3 pieces of cardboard one after
the other, only then will the padded cardboard
come out on the compression plate.
Profi pack P 425
02/2020