Barracuda Backup Guide De Démarrage Rapide page 8

7
Configure Backup Sources
1. Log into the Barracuda Backup appliance.
2. For Linux and Windows data sources, install the Barracuda Backup
Agent available on the System > Software Downloads page.
3. Go to Backup > Sources and click Add a Computer.
4. Enter the following backup source information:
• Enable backups: Enable backups based on a configured
backup schedule.
• Computer description: Name to identify the appliance.
• Computer name: FQDN or IP address; this must be resolvable
on your local network.
• Computer type: Data source device type.
• The requested connection information is based on the selected
Computer Type. For network file shares, select Enable File Share
Backups, and enter and test your credentials.
5. Click Save. Specify the data source details in the Add Data
Source page.
6. In the Add to Schedule section, select an existing schedule from the
drop-down menu, or click Add New to create a new schedule.
7. Click Save. The Edit Backup Schedule page displays.
8. Select whether to back up the entire data source with this schedule,
or select individual items for backup based on this schedule.
9. Specify the days and time of day the schedule is to run, and
click Save.
Repeat these steps for each data source you want to protect.
For details on setting up specific data sources, see Barracuda Campus:
https://campus.barracuda.com/doc/78156819/
For more information on setting up schedules, see Barracuda Campus:
https://campus.barracuda.com/doc/78156821/
If you plan to replicate data to Amazon Web Services, see Barracuda
Campus: https://campus.barracuda.com/doc/78807564/
5 Setup