NSK Ti-Max X10l Manuel D'utilisation page 11

CAUTION
• To avoid injury, keep your hands away from the bur during rotation.
7. Post-use Maintenance
After each patient maintain the product as follows.
WARNING
• Immediately after a treatment, the handpiece should be cleaned, lubricated and sterilized. Failure to properly
maintain the handpiece may lead to overheating, causing burn injuries or product failure.
CAUTION
• Do not use the following fluids to wipe, immerse or clean the product; strong/super acid water, strong acid/alkaline chemicals, chlorine-
containing solutions, solvents such as benzine or thinner.
7-1 Preparation
1) Wear eye protection, a mask and gloves to avoid infection.
2) Remove the bur.
3) Disconnect the handpiece from the motor.
9