Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5 Miscellaneous
GB
5.3
Trouble-
shooting
5.4
Disposal
46
Here you will find a list of possible faults and how to fix them.
If this list should not help you please contact the customer service.
Problem: Device cannot be switched on.
Fix: Make sure that the device plug end of the power supply cable
connected to the device and the power supply plug is plugged into a sock-
et. Press the ON/OFF button
Problem: No light pulse emission takes place when actuating the trigger
button
.
8
Fix: The readiness indicator
is pressed. This only happens if the skin contact with the light area or
8
skin contact area
7
Problem: There is sufficient skin contact but still the readiness indicator
does not flash yellow and it is not possible to trigger the light pulse.
Fix: If the readiness indicator
there may be a system fault. Switch the device off and disconnect it from
the power supply. After about 1 minute restore the power supply and switch
the device back on. If it still does not work contact customer service.
This product must not be disposed together with the domestic waste.
All users are obliged to hand in all electrical or electronic devices, regard-
less of whether or not they contain toxic substances, at a municipal or
commercial collection point so that they can be disposed of in an environ-
mentally acceptable manner.
Consult your municipal authority or your dealer for information about dis-
posal.
.
1
should flash yellow before the trigger button
3
is sufficient.
flashes or is lit in another colour, possibly
3
is
5
Publicité
Table des Matières
