Key Points And Precautions For Use - Blatchford Mini Blade XT Guide De L'utilisateur

Mini BladeXT
Mini BladeXT is suitable for walking and
designed specifically for general sport and
running.
Steps and Stairs
Because of the deep 'C' shape side profile
of the Mini BladeXT care should be taken
when descending stairs and steps due to the
potential hazard of 'over-stepping' .
Be aware of finger trap hazard at
all times

Key Points and Precautions for Use

Beware of slip hazard at all times especially on
wet/smooth surfaces.
Excessive wear of the sole cover could lead to
loss of grip.
Excessive wear or damage to the spring
elements could lead to structural failure. The
limb should not be used if the sole cover is
excessively worn, torn or loose.
Visually inspect the Mini BladeXT especially
the condition of the sole and toe spring
before any activity.
Any changes in performance or excessive
wear of this device must be reported to the
practitioner.
Changes in performance may include:
• Reduced energy return
• Unusual noises
• Softening of the toe and/or heel
Any changes in body weight and/or activity
level of the user must be reported to the
practitioner.
Assembly and repair of the Mini BladeXT must
only be carried out by a suitably qualified
practitioner.
BladeXT and Blatchford are registered trademarks of Blatchford Products Limited.
User Guide
Toe Spring
The product is water proof to a maximum
depth of 1 metre.
Thoroughly rinse with fresh water after use in
abrasive environments such as those that may
contain sand or grit, for example, to prevent
wear or damage to moving parts.
Thoroughly rinse with fresh water after use in
salt or chlorinated water.
Exclusively for use between -15˚C and 50˚C
(5˚F to 122˚F).
Cleaning:
Use a damp cloth and mild soap to clean
outside surfaces, DO NOT use aggressive
cleansers. Thoroughly dry before use.
Manufacturer's Registered Address
Blatchford Products Limited, Lister Road,
Basingstoke RG22 4AH, UK.
Please keep these instructions
2
EN
Sole
Cover
938372/03-0719