Function; Maintenance; Limitations On Use - Blatchford Esprit Guide De L'utilisateur

4 Function

This device comprises an e-carbon toe and independent heel spring.
Heel and toe springs are attached to the carrier using titanium and stainless steel screws.
The foot is wrapped in a UHM PE sock which is in turn surrounded by a PU foot shell.

5 Maintenance

Maintenance must be carried out by competent personnel.
We recommend a regular visual check at least annually. Signs of wear that may affect function
should be reported to their service provider (e.g. significant wear or excessive discoloration from
long term exposure to UV).
Any changes in performance of this device must be reported to the practitioner.
Changes in performance may include:
• reduced energy return
• unusual noises
• excessive or reduced movement
The practitioner must also be informed of any changes in body weight and/or activity level.
Cleaning
Use a damp cloth and mild soap to clean outside surfaces, do not use aggressive cleansers.

6 Limitations on Use

Intended life
A local risk assessment should be carried out based upon activity and usage.
Lifting loads
User weight and activity is governed by the stated limits.
Load carrying by the user should be based on a local risk assessment.
Environment
This device is waterproof to a maximum depth of 1 meter.
Thoroughly rinse this device with fresh water after
use in abrasive environments such as those that
may contain sand or grit, for example, to prevent
wear or damage to moving parts.
Thoroughly rinse with fresh water after use in salt
or chlorinated water.
Foot products must be adequately finished to prevent water ingress into the foot shell where
possible. If water enters the foot shell, the limb should be inverted and dried before further use.
Exclusively for use between -15 ˚C and 50 ˚C
(5 ˚F to 122 ˚F)
.
5
938446PK1/1-0121