Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Connected Wattage
The total power consumption of this device can be up to
2000 W. With this connected load a separate supply line pro-
tected by a 16 A household circuit breaker is recommended.
CAUTION: OVERlOAD:
•
If you use extension leads, these should have a cable
cross-section of at least 1.5 mm
•
Do not use any multiple sockets, as this device is too
powerful.
1. Place the machine on a flat surface.
2. Open the kettle with the button in the handle. Fill it with
water. Fill only up to the maximum mark (MAX). You can
read off the water level in the water level display.
3. Close the lid.
4. Place the kettle flush on the base.
5. Only connect the machine to a properly installed 230 V,
50 Hz safety socket.
6. Switch to position „1". The LED on the water level indicator
will light up to indicate that the water is being boiled.
7. After boiling the machine switches off automatically. Discon-
nect the machine from the mains electricity
Cleaning
WARNING:
•
Always turn the device off before cleaning it and remove
the mains plug. Wait until the device has cooled down.
•
Never immerse the device or the base in water or other
liquids.
CAUTION:
•
Do not use any wire brush or other abrasive objects.
•
Do not use any acidic or abrasive detergents.
•
Rinse the water container out with clean water. Then dry it
off with a cloth.
•
Clean the housing after use with a slightly damp cloth.
Decalcification
•
The frequency of the decalcifying operation depends on the
hardness of the water and on how often the appliance is
used.
•
If the machine switches off before the water boils, it probably
needs to be decalcified.
•
Please do not use vinegar but a commercially available
decalcification agent on the basis of citric acid. Only use the
quantities stated in the instructions.
NOTE:
After descaling the device boil fresh water in it several times
(approximately 3-4 times) in order to remove any residues. Do
not consume this water.
05_WK 2498 Neu.indd 17
.
2
Use
Technical Data
Model: ..............................................................................WK 2498
Power supply: ............................................................230 V, 50 Hz
Power consumption: ..........................................................2000 W
Filling quantity: .........................................................max. 1.7 Litre
Protection class: ........................................................................... Ι
Net weight: ...........................................................................0.7 kg
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!
Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of electrical equipment
in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on the
environment and human health.
This will contribute to the recycling and other forms of reutilisa-
tion of electrical and electronic equipment.
Information concerning where the equipment can be disposed of
can be obtained from your local authority.
17
15.08.11 09:53
Publicité
Table des Matières
