Publicité
Les langues disponibles
Les langues disponibles
User Manual
Introduction
Thank you for purchasing the 100m C6 HDBaseT HDMI 18G, IR & RS-232 Extender. This product has
been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2-year warranty
and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it
for future reference.
The Lindy C6 HDBaseT HDMI 18G & IR Extender is a two part of a high-performance solution for extending
HDMI signals over long distances via Cat.6 network cable.
HDBaseT is a globally recognised standard for high quality distribution of AV content and other
technologies, including power and control, over longer distances via low cost Cat.6 or above cable.
Supporting resolutions up to 4K Ultra HD, video can be viewed in stunning clarity, while additional support
for HDR (High Dynamic Range) allows content to be displayed with enhanced brightness, greater contrasts
of blacks and whites and a much wider colour gamut. This provides a reliable solution for creating eye-
catching digital signage in retail, immersive displays at events or engaging setups in larger conference
rooms or lectures halls.
HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
Please Note: The quoted lengths and resolutions are possible with a direct connection between
Transmitter and Receiver using good quality Cat.6 solid core cable. Using a different cable type, or
introducing wall plates, couplers or patch panels may result in a reduction of possible distances.
Package Contents
38206
▪
HDMI Transmitter
▪
IR Receiver, 1.5m
▪
IR Emitter, 1.5m
▪
2 x Mounting Ears
▪
3-Pin Terminal Block
▪
24VDC 1A Multi-country Power Supply (UK,
EU, US & AUS), Screw Type DC Jack:
5.5/2.1mm
▪
Lindy Manual
Features
▪
Supports resolutions up to 3840x2160@60Hz 4:4:4 8bit, with additional support for HDR up to 4:2:2
10/12bit
▪
Audio Pass-through of all HDMI audio formats including Dolby Atmos & DTS:X
▪
PoC (Power over Cable) support, requiring a power supply connection from only one side of the
installation
▪
HDMI loop out port at the transmitter unit for local monitoring and viewing
▪
3.5mm audio port at the receiver for analogue audio extraction (PCM 2.0)
▪
Bi-directional IR Control (20-60KHz) of equipment via the extender
▪
RS-232 & CEC Pass-through
▪
Screw Type DC Jack for a secure power connection
38207
▪
HDMI Receiver
▪
IR Emitter, 1.5m
▪
IR Receiver, 1.5m
▪
2 x Mounting Ears
▪
3-Pin Terminal Block
▪
24VDC 1A Multi-country Power Supply (UK,
EU, US & AUS), Screw Type DC Jack:
5.5/2.1mm
▪
Lindy Manual
English
Publicité
