KitchenAid KSB565 Guide D'utilisation Et D'entretien page 11

Preparing the Blender for use
6. Put pitcher assembly onto the
Blender base.
NotE:
When properly positioned, pitcher
assembly will rest completely on Blender
base. If not, repeat steps 3 and 4.
Gap
7. Put lid on pitcher.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire, or electrical shock.
8. Plug power cord into a grounded
3-prong outlet. Blender is now ready
for operation.
9. Before removing the pitcher from the
base, always press OFF and unplug the
No
power cord.
Gap
9