Using The Blender; Before Use; Operating The Blender; Crush Ice - KitchenAid KSB565 Guide D'utilisation Et D'entretien

Before use

NotE: While the Blender is on or the
PULSE MODE indicator light is blinking:
- Do not interfere with blade movement
- Do not remove pitcher lid

operating the Blender

The KitchenAid Blender has five speeds:
®
STIR, ChOP, MIx, PURÉE and LIQUEFY. In
addition, it also features CRUSh ICE and
PULSE MODE.
1. With convenient one-step operation,
this unit will operate only when a
speed selection button is pressed.
2. Before operating the Blender, make
sure the pitcher is properly secured
in the locking collar and assembly is
positioned on the Blender base.
Gap
NotE: If a gap exists between the locking
collar and the base, the pitcher might not
be locked into the locking collar or the
assembly is not positioned properly on the
Blender base. See Blender Assembly for
further instructions.
3. Put ingredients into the pitcher and
firmly attach lid.

using the Blender

4. Press the desired speed button for
IMPoRtANt: If blending hot foods or
liquids, remove the center ingredient cup.
Operate only on STIR speed.
5. To turn off the Blender, press OFF.
6. Before removing the pitcher assembly,

cRusH IcE

Your KitchenAid
ICE feature. When selected, the Blender
will automatically pulse at staggered
intervals at the optimal speed for crushing
ice or other ingredients.
1. Before operating the Blender, make
NotE: If a gap exists between the locking
collar and the base, the pitcher might not
be locked into the locking collar or the
collar is not positioned properly on the
Blender base. See Blender Assembly for
further instructions.
No
2. Put ingredients into the pitcher and
Gap
3. Press CRUSh ICE. The indicator light will
10
continuous operation at that speed.
The red indicator light above the
selected speed will stay lit. You may
change settings without stopping the
unit by pressing a new speed button.
The Off button will stop any speed
and deactivate the Blender at the
same time.
unplug the power cord.
Blender offers a CRUSh
®
sure the pitcher assembly is properly
positioned on the Blender base.
firmly attach lid.
stay lit. The Blender will automatically
pulse at staggered intervals.