Publicité
Water level can be adjusted means of height adjustment of the floater.
For this purpose lift up the locking screw. Open the cover.
Loose the hexagon nut
adjust the floater at desired height
and tighten the nut on again.
Close the cover.
Click into place the locking screw.
Take care of the following:
Float valve has to be placed that way that it is situated in a 90° angle to the valve lever
Max. cable lengths:
Section
till
e.g.
100 Watt
Type NYY
Guideline values. Please note cable data sheets and local standards.
All installation, maintenance and inspection works must be carried out by an authorised and
qualified specialist. Local norms must be respected.
,
till
till
200 Watt
300 Watt
400 Watt
till
.
height adjustment
Publicité
