Pur Line MOBY 100 Mode D'emploi page 17

6. When the machine is in Sleep function, the Fan Speed
would turn to be LOW speed.
Swing function
By pressing SWING button, the air vent will rise in 3 different angles:
45º 60º 75º
Every time when you turn on the machine, the air vent will rise to
position 75º first, then return to position 45º automatically. For re-
setting the angle, the air vent will rise to 75º first, too. The interval of
each move is 4 sec.. As you turn off the air vent, the air vent will
close.
o o
45 60
Dehumidification function
In dehumidification mode, the temperature cannot be adjusted, the
ventilation will fix at low speed.
TiO2 / Ionizer function
1. This is only for the model with TiO2 or Ionizer function, i.e.
model no. with T or I. T stands for TiO2, I stands for Ionizer. *
TiO2 is a kind of photochemical catalysis.
2. To start the TiO2 or Ionizer button, please press TiO2/Ionizer
button. These 2 functions can clean the air, improve the air
quality.
Self-diagnosis
This machine is equipped with self-diagnosis function. If something
is wrong in the machine, the LCD will show the word "E1" or "E2". As
this time, please call your service centre.
o
75
11
All the above functions can
also be performed with the
supplied remote control.
This remote control requires 2
pcs AAA batteries to operate
NOTICE !
1. To prolong the compressor's life, after switch-off of the unit, please
wait for 3 minutes (at least) before re-switch.
2.
The cooling system will switch off if the ambient temperature is lower
than the set one. The ventilation, however, keeps working on the set
level. If the ambient temperature rises above the selected level, the
cooling will return to work.
DRAINAGE
During the process of cooling, some water will be extracted from the
air into the unit. If the reservoir is full,
motor will stop. The "water full" sign will light on, also the machine
will beep as reminder.
To make the cooling work again, please empty the water by one of
the following ways:
FIG.13
both of the compressor and
12