MUST BE REPLACED BY MANUFACTURER ,
ITS
SERVICE
AGENT
OR
QUALIFIED
PERSONS
IN
AVOID A HAZARD.
THIS APPLIANCE IS NOT INTENDED FOR
USE BY PERSONS (INCLUDING CHILDREN)
WITH REDUCED PHYSICAL, SENSORY OR
MENTAL CAPABILITIES, OR LACK OF
EXPERIENCE AND KNOWLEDGE, UNLESS
THEY HAVE BEEN GIVEN SUPERVISION OR
INSTRUCTION CONCERNING USE OF THE
APPLIANCE BY A PERSON RESPONSIBLE
FOR THEIR SAFETY. CHILDREN SHOULD BE
SUPERVISED TO ENSURE THAT THEY DO
NOT PLAY WITH APPLIANCE.
ELECTRICAL SAFETY
•
FOR INDOOR USE ONLY.
•
SWITCH OFF AND UNPLUG WHEN NOT
IN USE.
•
DO NOT USE IN HUMID OR WET
ENVIRONMENTS (FIG 3)
•
DO NOT PULL THE UNIT ALONG BY THE
CORD.
•
IF THE SUPPLY CORD IS DAMAGED, IT
MUST BE REPLACED BY AN
ELECTRICIAN OR SIMILARLY QUALIFIED
PERSON, TO AVOID HAZARD.
FOR MAXIMUM EFFICENCY
•
Do not exceed the recommended
room size 50m
3
(typically 20m
area)
•
Close doors and windows
•
Keep curtains of blinds closed during
the sunniest part of the day
•
Keep filters clean
•
Once room has reached the desired
conditions, reduce temperature and
ventilation settings
PARTS
Front
1.
Control Panel
2.
Air outlet
3.
Carrying handle
4.
Caster
Accessories
10. Inward adaptor - for insertion over hose
and connection with piece 1.
11. Outward adaptor - for insertion over
hose and into foam strip (or into hole in
the wall/window).
12. Round cap for filling the hole in
wall/window.
13. Exhaust hose.
14. Foam strip - for filling the open window
space and with hole for connection to
exhaust hose.
15. Foam strip - for filling the open window
space
16. Drain tube for continuous drainage
SIMILARLY
ORDER
TO
2
floor
Back
4
5.
Air filter
6.
Air inlet
7.
Exhaust air outlet
8.
Cord storage
9.
Water stopper / drainage point
FIG. 2
FIG.3
FIG.4