Pur Line MOBY 100 Mode D'emploi page 14

INSTALLATION
Installation of the exhaust pipe
The unit is a portable air conditioner that may be moved from room to room.
2. Using the foam strips
•
Offer foam strips to the window gap and cut to size if necessary.
•
Feed exhaust hose through the foam strip and insert strip into window gaps as
shown and slide window across so that foam is held securely. This technique
may also be used for sash windows. Note: Take care to maintain protection
against intruders
3. Using the adaptor
FIG.6
•
Cut a 151mm diameter hole in the wall or window.
•
Feed exhaust hose through the window or wall and attach the threaded adaptor
from the outside as shown.
Mounting of the exhaust pipe
•
When not in use, plug the hole with the cover provided.
•
Use only the hose
provided and clip
exhaust hose and unit
adaptor to the back of
the air conditioner
•
Avoid kinks and bends in
the exhaust hose as this
will cause expelled moist
air to build up causing
the unit to overheat and
shut down. Fig 8 & 9
show correct position
•
The hose may be
extended from 300mm to
1500mm but for
maximum efficiency use
the shortest length
possible.
WARNING!
The length of the exhaust pipe
is specially designed according
to the specification of this
product. Do not replace or
prolong it with your own private
hose as this could cause the
unit to mal-function.
Foam strips
FIG.5
Wall or Window
Outward adaptor
FIG.7
6
FIG.8
FIG.9
FIG.10