Passenger Seat And Rider Seat; Removing The Passenger Seat - MV Agusta Turismo Veloce 800 Lusso 2015 Manuel D'utilisation

4.6.

Passenger seat and rider seat

4.6.1. Removing the passenger seat

Insert the key.
Press the end part of the seat and turn the key
counterclockwise at the same time.
Lift the seat from the rear end and remove it
from the motorcycle.
Follow these instructions to reassemble the pas-
senger seat:
Position the seat on the motorcycle, inserting it
4
into the front latches.
Turn the key in the keyslot.
Press the end part of the seat.
Release the key.
Press the seat again, making sure it is tightly
attached to the structure.
WARNING
After reassembling the passenger seat
and in any case every time before using
the motorcycle, ensure that the compo-
nent is positioned properly and is well
anchored to the frame of the vehicle.
OPERATION
- 98 -
4