Technical Specifications; Dimensions; Power Requirements - Clarity XL50 Guide D'utilisation

Téléphone amplifié

Masquer les pouces

Table des Matières

Les langues disponibles

TROUBLESHOOTING

2. A RFI (Radio Frequency Interference) filter can be placed on the

line to help minimize or eliminate radio or CB transmissions. Try

relocating the telephone to another area.

Unable To Hear Phone Ringer

1. Too many phone or phone devices on a line may cause your

phone to not ring. Disconnect one (1) or two (2) of the devices

to see if the problem is eliminated. If not, contact your local

phone company for load guide lines.

2. If power is not being supplied to the phone, the extra loud ringer

will not work.

Volume Control Does Not Work

BOOST must be activated to turn on the additional amplification.

Static On The Line

1. Your phone may be located near a touch lamp, microwave,

refrigerator or other household appliances. Try relocating your

phone to another area.

2. A cordless phone on your line may cause static. Try disconnecting

the cordless phone. This may eliminate the problem.

3. Extra devices attached to the telephone, such as CID units and

answering machines may cause static. Disconnecting the devices

may eliminate the problem.

4. If there is also a DSL service in the home, this will cause

interference on the line. That interference is then amplified by

the phone, causing a less than optimal quality of conversation.

Install the phone line filter provided by the DSL service provider

to reduce the amount of interference on the line.

Unable to Access Automated Systems

Automated systems used by banks, long distance voicemail and other

applications require that a phone be set to "tone" dialing. Check

the switch on the back of the phone labeled "T/P" and set to "T."

This will enable the phone to be compatible with these automated

systems.

TROUBLESHOOTING

If No Power is being Supplied to the Phone.

1. If the power goes out, or the AC Adapter is not properly

connected to the phone, several functions of the phone will

not work. The amplification, extra loud ringer, and the lighted

keypad will not function properly.

2. The phone will drain the backup batteries very quickly. This

will cause the need for the batteries to be changed frequently

and the Low Battery indicator light to constantly illuminate.

Do I Need to Install Batteries?

Batteries are optional. They provide backup in case of a

power outage. They are recommended in areas of frequent

power outages. This phone uses four (4) alkaline batteries.

They will sustain the following functions: amplification, keypad

backlighting and loud ringer volume.

Still Not Working?

If, after going through this checklist, the XL50 is still not

functioning properly, press the blue ClarityLogic button

(upper right corner of the phone) for direct access to a

Customer Care Representative.