Outgoing Speech Amplification (Osa); Technical Specifications - Clarity Alto Mode D'emploi

Masquer les pouces Voir aussi pour Alto:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Outgoing Speech Amplification (OSA)

This function amplifies your speech so it becomes louder to the person on the other
end of the call . To enable this function, press and hold the BOOST button for five sec-
onds . The phone beeps; the function can be enabled/disabled while on a phone call or
in standby mode . The OSA light (part of the visual ringer)turns on when this function is
enabled .
To return to the default setting for your voice volume level, press and hold the BOOST
button again for five seconds . You will hear a beep confirming that the function is dis-
abled .
NOTE: In order to experience the best audio quality for both parties during a call, we
recommend you turn on this function only if your voice is too quiet. OSA is not active
in speakerphone mode.
Amplified dB Level: 50dB/124 dBSPL
Tone control range: From 300 to 3000Hz
Dimensions:
Size: 10" x 7 .67" x 4 .4" (25 .4cm X 19 .5cm x 11 .2cm)
Weight: 2 .45 lbs (1 . 1 13kg)
Power Requirements:
DC Adapter: 9VDC, 800 mA
Batteries: 4 AA alkaline batteries (not included)
16
OPERATIONS
Figure 10

TECHNICAL SPECIFICATIONS

Publicité

Table des Matières
loading

Table des Matières