Cisco Systems LINKSYS WAG354G Mode D'emploi page 47

Wireless-G ADSL Home Gateway
The Factory Defaults Tab
Restore Factory Defaults. If you wish to restore the Gateway to its factory default settings and lose all your
settings, click Yes.
To begin the restore process, click the Save Settings button to save these changes, or click the Cancel Changes
button to undo your changes.
The Firmware Upgrade Tab
The Gateway allows you to upgrade firmware from the LAN (Local Area Network) side of the Gateway.
Upgrade from LAN
To upgrade the Gateway's firmware from the LAN:
1. Download the Gateway's firmware upgrade file from www.linksys.com/international.
2. Extract the file on your computer.
3. Click the Browse button to find the firmware upgrade file.
4. Double-click the firmware file that you have downloaded and extracted.
5. Click the Upgrade button, and follow the on-screen instructions.
To cancel the firmware upgrade, click the Cancel Upgrades button.
Chapter 5: Configuring the Wireless-G ADSL Home Gateway
The Administration Tab
Figure 5-38: Factory Defaults
Figure 5-39: Firmware Upgrade
41