Figure 5-35: System Log - Cisco Systems LINKSYS WAG354G Mode D'emploi

Wireless-G ADSL Home Gateway
The Reporting Tab
The Reporting screen provides you with a log of all incoming and outgoing URLs or IP addresses for your Internet
connection. It also provides logs for VPN and firewall events.
Reporting
• Log. To enable log reporting, click Enabled.
• Logviewer IP Address. Enter the IP Address of the computer that will receive logs. You will need Logviewer
software to view these logs. This free software is available for download from www.linksys.com.
Email Alerts
• E-Mail Alerts. To enable E-Mail Alerts, click Enabled.
• Denial of Service Thresholds. Enter the number of Denial of Service attacks that will trigger an e-mail alert.
• SMTP Mail Server. Enter the IP address of the SMTP server.
• E-Mail Address for Alert Logs. Enter the e-mail address that will receive alert logs.
• Return E-Mail address. Enter the return address for the e-mail alerts.
To view the logs, click the View Logs button. A new screen will appear. From the drop-down menu, you can
select which log you want to view. Click the Clear button to clear the log information. Click the pageRefresh
button to refresh the information. Click the Previous Page button to go to the previous page of information. Click
the Next Page button to move to the next page of information.
When finished making your changes on this tab, click the Save Settings button to save these changes, or click
the Cancel Changes button to undo your changes.
Chapter 5: Configuring the Wireless-G ADSL Home Gateway
The Administration Tab
Figure 5-34: Reporting

Figure 5-35: System Log

39