Protective Measures And Warnings - HEBU medical HBS Argon HF 9523 Mode D'emploi

EN
10

Protective measures and warnings

!
Before any procedure, check the cables, accessories (handles,
electrodes, forceps) and foot switches for any signs os visible
defective insulation. These can result in burns if they come into
The unit should only be operated at a mains socket with protective earth contact.
When performing electrosurgical procedures, the risk or burns must be kept as small as possible. For
this, the following safety measures must be observed:
!
The unit is not allowed to be used in areas with explosive risk.
!
The reparation of the unit is only allowed to be carried out by HEBU or by HEBU authorized
agent.
!
It is necessary to ensure, that the unit is used only by persons knowing the user's guide.
!
The unit and the connecting cables should be checked before each use.
!
Interferences must be eliminated in time.
!
40
irregularity. Do not use cables or instruments with broken or
contact with the skin!
Make sure, that you are familiar with all features and safety of
the electrosurgical device connected with the HBS Argon
Module.
HBS Argon