Front Panel - Fender 65 TWIN REVERB Mode D'emploi

Your "new" '65 Twin Reverb® amplifier is living proof of
the quality and longevity of Fender® amplifier designs.
Over the years, many musicians have found the versatile
Twin Reverb a perfect match for guitar, bass guitar,
keyboards, vocals, accordion, and the electric violin
among others. Featuring REVERB and VIBRATO, this
two-channel amplifier has been used on thousands of
recordings and countless live performances since 1954
when the first version appeared on the music scene.
Your new '65 Twin Reverb is a faithful reproduction of
an original 1965 Twin Reverb model AB 763. Every
effort has been made to keep the circuitry exactly like
the original. For improved reliability and manufacturing
efficiency, a printed circuit board for the components is
A
BRIGHT
C D
B
NORMAL
VOLUME TREBLE MIDDLE
NORMAL CHANNEL (A-F)
A . INPUTS - Plug-in connections for instruments.
B . BRIGHT - This switch provides an extra boost to
the high-frequency range.
C . VOLUME - Adjusts the loudness of the amplifier.
D . TREBLE - Adjusts the high-frequency tone.
E . MIDDLE - Adjusts the mid-frequency tone.
F . BASS - Adjusts the low-frequency tone.
NOTES
• {A and G} Both INPUTS "1" provide +6dB gain more
than INPUTS "2."
• {B and H} The BRIGHT tone boost tapers off as the
VOLUME setting increases.
• {D-F and J-L} If either group of tone controls is
turned fully counter-clockwise there will be no
sound from that channel.
• {M-O} REVERB and VIBRATO affect only the VIBRATO
CHANNEL.
• The VIBRATO channel provides more high-frequen-
cy response than the NORMAL channel.
Fender® `65 Twin Reverb®

Front Panel

G
BRIGHT
E F
H
VIBRATO
BASS
used in place of the original phenolic parts panel. The
power and output transformers used in the 85-watt
'65 Twin Reverb are built to the original specifications
and although some components used in this re-issue
amplifier are different in size and shape from the earlier
version, the component values are identical. The
speakers in the '65 Twin Reverb are duplicates of the
original Jensen 12-inch "Specially Designed for Fender"
speakers used for many years during the 1960s.
It is suggested you read this manual thoroughly to
understand all the features and functions of the
amplifier. The purchase of a Fender amplifier will
provide years of musical enjoyment and the '65 Twin
Reverb helps keep the Fender legacy going strong.
I J
K L
VOLUME TREBLE MIDDLE BASS REVERB
VIBRATO CHANNEL (G-O)
G . INPUTS - Plug-in connections for instruments.
H . BRIGHT - This switch provides an extra boost to the
high-frequency range.
I . VOLUME - Adjusts the loudness of the amplifier.
J . TREBLE - Adjusts the high-frequency tone.
K . MIDDLE - Adjusts the mid-frequency tone.
L . BASS - Adjusts the low-frequency tone.
M . REVERB - Adjusts the REVERB effect level. Switch OFF
the REVERB effect by turning this knob fully counter-
clockwise. The FOOTSWITCH can also be used to
switch ON/OFF the REVERB effect.
N SPEED - Adjusts the rate of the VIBRATO effect. The
footswitch must be connected and switched on for
the Vibrato effect to function.
O . INTENSITY - Adjusts the intensity of the VIBRATO
effect. The footswitch must be connected and
switched on for the Vibrato effect to function.
P . POWER INDICATOR - Illuminates when the amplifier
is ON and receiving power. Unscrew the red jeweled
cover for bulb (type T47) replacement.
6
M N O
SPEED INTENSITY
P