Signs And Symbols; Product Information; Manufacturer´s Data; Device Identification - Mafell S 25 M Traduction De La Notice D'emploi Originale

1

Signs and symbols

2

Product information

for dust extractors S 25 M with Art.-No. 91C301, 91C321, 91C322
for dust extractors S 25 L with Art.-No. 91C201
2.1 Manufacturer´s data
MAFELL AG, Beffendorfer Straße 4, D-78727 Oberndorf / Neckar, Phone +49 (0)7423/812-0, Fax +49
(0)7423/812-218

2.2 Device identification

All information required for device identification is available on the rating plate attached to the motor casing.
This symbol appears at places where you will find instructions for your own
safety.
Non-compliance with these instructions may result in very serious injuries.
This symbol indicates a potentially hazardous situation.
If this situation is not avoided, the product or objects in its vicinity may get damaged.
This symbol indicates tips for the user and other useful information.
CE symbol to document compliance with the basic safety and health requirements
according to Appendix I of the Machinery Directive.
For EU countries only
Do not dispose of electrical tools together with domestic waste!
In accordance with the European directive 2002/96/EC on waste electrical and
electronic equipment and transposition into national law, obsolete electrical tools
must be collected separately and recycled in an environmentally-compatible manner.
To reduce the risk of injury, please read the operating instructions.
Warning: This device contains harmful dusts. Emptying and maintenance including
removal of the dust bag may only be carried out by competent persons wearing
suitable personal protective clothing. Do not turn on before the entire filter system is
installed and the function of the volume flow control has been checked.
-17-