Velleman HPS10 Personal Scope Manuel D'utilisation page 38

Markers
1
38
X / Y-pos
Charge
Fig 30
HPS10 PersonalScope
1. Press the "Marker 1-2"-key to view, select or
hide the markers. (1)
2. Press the cursur keys to move the markers. (2)
Notes:
•
By pressing the 'Marker 1-2'-key, you
select between marker 1 or 2. The screen
shifts automatically until the selected time
marker is on screen.
•
At dynamic display mode (see display set-
up), the best display layout is chosen
depending the use of time markers or voltage
markers.
•
Some meter readouts are replaced by the
marker readouts.
•
Depending on the chosen display layout, not
all of the marker readouts can be displayed at
2
the same time.
•
Removing the markers from the screen can
be done by repeatedly pressing the 'Marker
1-2'-key or by a short press of the 'Display'-
key and using the up/down cursor keys.
TM