Table des Matières
Publicité
Screen memory
1
52
Fig 44
Fig 45
2
Fig 46
3
HPS10 PersonalScope
HOLDING THE SCREEN
Memory
Press the 'Memory'-key to freeze the waveform
on-screen.
It may be useful to "freeze" certain signals on your
screen. This will allow the user to study the signal or
perform measurements with the markers. (Fig 44)
Remarks:
•
Most of the keyboard functions are disabled.
•
Pressing the Memory key immediately stops
sampling at slow timebases. The rest of the sample
buffer will be cleared.
•
'HOLD' will be displayed inverted. (1)
•
Releasing the 'Hold'-mode will remove the
waveform from the screen.
Memory
STORE A SCREEN
Press the Memory key to "Hold" the waveform on-
screen.
A long keypress of the 'Trigger'-key mode stores the
current screen into memory. (2)
t - V / d i v
RECALL MEMORIES
Pressing the 't-V/div'-key when in hold mode toggles
the screen between the frozen waveform and the stored
waveform. (Fig 45)
Notes:
•
The store and recall- function is only available in
'HOLD'-mode
•
All setting such as timebase, input sensitivity, input
coupling, probe setting and readouts are also stored
into memory.
TM
Publicité
Table des Matières
