Maintenance And Environmental Protection; Service Instructions - Meister MAH1500-2 Traduction Du Manuel D'utilisation Original

Setting the Impact Speed (fig. 3)
The machine is equipped with a stepless
impact speed regulator (4), which allows
working in a manner appropriate to the
material.
With the speed regulator you can set
impact frequencies between 900 and
1800 impacts per minute. Set the impact
frequency according to the material you
are working on.
9 – Maintenance and envi­
ronmental protection
Cleaning
Before undertaking any work on the
machine, pull the power plug.
Keep the ventilation slots clean and free
from foreign objects at all times.
Before every use, inspect the power
cord for damage and have it replaced
by a professional if it is damaged.
Clean the unit with a moist cloth or
absorbent tissue. Do not allow liquids of
any kind to enter the machine. Regularly
clean dust, debris and old grease off the
tool chuck.
After longer periods of non-use or when
starting the machine up in sub-freezing
temperatures, allow the machine to run
without load for a few minutes to distrib-
ute the lubricant within the machine.
At regular intervals the grease filling of
the transmission should be inspected.
Use the face spanner (10) to remove the
transmission cover (1) and add grease
if necessary. Do not pack full of grease!
42
After that, replace the cover (1).
5452990-Abbruchhammer_man.indd 42 5452990-Abbruchhammer_man.indd 42
Have further maintenance and repair
work, which involves opening the hous-
ing, carried out by a qualified profes-
sional or contact the customer support
department.
CAUTION! Electrical and battery
operated units that no longer
work should not be disposed of in
the household waste! They are to be
collected separately, in accordance
with the 2012/19/EU directive
for the disposal of electrical
and electronic waste, and
sent for proper and environ­
mentally­friendly recycling.
Please discard power tools no longer
usable at a local collection point.
Collection and disposal of packaging
materials separately by types com­
plying with local rules and regula­
tions. For details, please contact your
municipal authority concerned.
10 – Service instructions
• Store the machine, operating instruc-
tions and where necessary the acces-
sories in the original packaging. In
this way you will always have all the
information and parts ready to hand.
• Meister devices are to a large extent
maintenancefree, a damp cloth being
sufficient to clean the casing. Please
note additional hints given in the
operating instructions.
• Meister devices are subject to strin-
gent quality control. If however a
functional fault shoult occur, send the
device to our servicing address. The
repairs will be carried out in a short
time.
09.07.20 11:18 09.07.20 11:18