Maintenance And Environmental Protection; Service Instructions - Meister PH900M Traduction Du Manuel D'utilisation Original

pneumatic principle produces a highly
elastic impact effect and a recoilless
operation. Unlike on the percussion
drill, the drilling performance does not
depend upon the pressure applied.
WARNING! A higher pressure will
therefore not increase drilling
performance!
Note
With a suitable adapter (not included in
the delivery) a key-type drill chuck for
working with conventional drill bits can
be attached to the power tool. Follow
the manufacturer's instructions for using
accessories.
10 – Maintenance and
environmental
protection
WARNING! Pull out mains plug.
Clean the machine housing with a
damp cloth only – do not use solvents!
Then dry well. Always ensure that the
ventilation slots of the machine are kept
clean. Make sure that the gears have
sufficient lubrication. After an operating
time of approximately 5 hours, unscrew
the gear lubrication filling opening (2)
with the flange wrench (8) and get a
specialist to check whether sufficient
lubrication is available.
CAUTION! Electrical and battery
operated units that no longer
work should not be disposed of in the
household waste! They are to be
collected separately, in accordance
MW-5402860-Bedien-2008.indd 35 MW-5402860-Bedien-2008.indd 35
with the 2012/19/EU directive
for the disposal of electrical
and electronic waste, and
sent for proper and environ­
mentally­friendly recycling.
Please discard power tools no
longer usable at a local collection
point. Collection and disposal of
packaging materials separately by
types complying with local rules
and regulations. For details, please
contact your municipal authority
concerned.
11 – Service instructions
• Store the machine, operating
instructions and where necessary the
accessories in the original packaging.
In this way you will always have all
the information and parts ready to
hand.
• Meister devices are to a large extent
maintenancefree, a damp cloth being
sufficient to clean the casing. Do not
drop electrical machines in water.
Please note additional hints given in
the operating instructions.
• Meister devices are subject to
stringent quality control. If however a
functional fault shoult occur, send the
device to our servicing address. The
repairs will be carried out in a short
time.
• A brief description of the defect
speeds up the faulttracing and
repair time. If within the guarantee
period, please enclose the guarantee
document and the proof of purchase.
35
26.08.20 10:23 26.08.20 10:23