Sharp LL-T15G4 Mode D'emploi page 18

Adjusting the screen display
GAIN CONTROL Menu
GAIN CONTROL
MANUAL AUTO
BLACK LEVEL 32
CONTRAST 50
1024x768 ANALOG
V : 6 0Hz H : 4 8.4kHz
MANUAL: Individual menu options are manually
adjusted.
AUTO: Every menu option is automatically
adjusted using the Auto Gain Control*
function.
Notes:
- Press the button to select [AUTO].
- To choose a menu option:
- To go to the next menu: MENU button
* Auto Gain Control function
- The Auto Gain Control adjusts contrast and
black level based on the brightest and darkest
colors of the image displayed. If you are not
using the Adjustment Pattern it is necessary to
have black area and white area of at least 5 mm
x 5 mm on the screen. Adjustment may not be
possible without those areas.
- If the signal coming from the computer is
Composite Sync or Sync on Green, automatic
adjustment cannot be performed. Please
perform manual adjustment instead.
- If [OUT OF ADJUST] is displayed, perform
manual adjustment.
- When using the Auto Gain Control function, set
[WHITE BALANCE] to other than [USER]. If
[USER] is set, the Auto Gain Control function
cannot be used.
BLACK LEVEL
Total screen brightness can be adjusted while
watching the color pattern. (
Color pattern
CONTRAST
While watching the color pattern, adjustments can
be made so that all gradations appear.
( buttons)
WHITE BALANCE Menu
Notes:
- On settings other than [STD] not all gradations
- If [DISPLAY MODE] is set to [sRGB] or [VIVID],
- Use the
/ MODE button - Selecting [USER] will display the setting values for
- Use the
- To go to the next menu: MENU button
COOL ....... Color tone bluer than standard
STD .......... Color tone standard setting
WARM ..... Color tone redder than standard
USER
buttons)
18
(When using an analog signal)
WHITE BALANCE
COOL STD WARM USER
R-CONTRAST
G-CONTRAST
B-CONTRAST
1024x768 ANALOG
V : 6 0Hz H : 4 8.4kHz
can be displayed. To display all gradations, set
to [STD].
no other setting than [STD] can be selected.
buttons to select [COOL], [·], [STD],
[·], [WARM] or [USER].
[R-CONTRAST], [G-CONTRAST] and
[B-CONTRAST], in order to make fine adjustments.
/ MODE button to select
[R-CONTRAST], [G-CONTRAST] and
[B-CONTRAST].
• ............. Color tone slightly bluer than standard
• ............. Color tone slightly redder than standard
R-CONTRAST ..... button for blue-green
button for red
G-CONTRAST ..... button for purple
button for green
B-CONTRAST ..... button for yellow
button for blue