Sharp LL-T15G4 Mode D'emploi page 10

Standing up and adjusting the monitor
CAUTION!
- Be sure to hold both sides of the monitor when
adjusting the viewing angle. The LCD panel
used in this monitor is made of glass. Pressure
from hands on the LCD panel could cause
damage.
- Be careful not to allow your fingers to be
pinched.
- Not to fold up the monitor attaching the cable as
this could lead to a malfunction.
Standing up the monitor
1. Press down on the stand and lift up the top
section of the monitor.
- When raising the display section, movement
becomes harder in the middle of travel.
Continue raising by applying more force at that
point.
approx. 5°
- Raise the display section until it stops.
(when tilted forward approx. 5º)
2. Adjust to an easy to view angle.
Product description
Angle adjustment
Press down on the stand and adjust it to a suitable
viewing angle.
- Do not use the monitor when tilted back beyond
approximately 25º. The monitor may fall over
leading to injury or malfunction.
Folding up the monitor
1. Remove the cables.
2. Press down on the stand and gently fold back
the monitor.
10
approx. 5°
approx. 5°
approx. 25°
Prohibited range
approx. 25°