Royal Sovereign RWD-1600B Guide D'utilisation page 8

PRODUCT OPERATION
When operating the water dispenser for the first time, you will need at least 15-30 minutes for the
hot water to reach the desired temperature and 1 hour for the cold water to reach the desired
temperature.
The water dispenser has 3 indicator lights on the front panel.
• When the right
cooling tank.
• When the left
water tank.
• When the middle
bottle. Replace the water bottle and close the door to reset the unit. The water dispenser will
work again and the indicator will turn off.
Using the Water dispenser
• To dispense Hot water, slide the hot water safety handle to the left and then push the hot water
button down.
• To dispense Cold water, push the cold water button down.
• To dispense Room Temperature water, press the room temperature button down.
8
indicator light is on, the unit is in the process of cooling water inside the
indicator light is on, the water dispenser is heating water inside the heated
power indicator on the front panel is on, there is no water left in the water