Timer Function - AEG KRC 4361 BT Mode D'emploi

NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
devices.
• In case of problems with the registration of a replay
device, deactivate the WiFi-/ and mobile data function
in your playback device.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player. Observe the operation
manual of your player.
• If a mobile phone on which you are playing music
receives a call, the music will be interrupted. Press
the ANSWER/PROG/AMS button (6) to receive the
call. The sound will be played back through the radio.
Speak towards the microphone or transfer the call to
your mobile phone. When doing this, please refer to
the fade-in on the display of your mobile phone. After
you have terminated the phone call, the playback will
resume.
Description of the operating buttons for Bluetooth
NOTE:
Your Bluetooth playback device has to support the follow-
ing functions.
• ANSWER/PROG/AMS (6)
You can pause and continue music playback. Press again
to continue playback.
If a phone call is received during music playback, you can
use this button to receive the call.
Setting the Alarm Time (24 h) (in Standby
Mode)
You can set up to two alarms. As follows:
1. Hold down the ALARM1 or the ALARM2 button (13/12)
for approx. 3 seconds. "ALARM 1" or "ALARM 2" will
blink in the display and the alarm signal is shown.
• You can now perform the settings for the alarm signal,
the hours, and the minutes by pressing the SKIP+ (7)
and SKIP- (8) buttons successively. With regard to the
alarm, you can choose between buzzer (
radio ( ).
= Upon reaching the alarm time, a buzzer will
= Upon reaching the alarm time, the last
• Confirm each entry with the ALARM1 or ALARM2
button.
Snooze function
The automatic alarm can be switched off using the SNOOZE/
DIMMER button (15) for approx. 9 minutes.
Switch off the buzzer
In order to switch off the alarm until the following day please
press the /FUNC button.
NOTE:
If you have been awakened by radio, the volume will be set
to the last set volume after pressing the /FUNC button.
Press the /FUNC button again to shut off the alarm until
the next day.
Disabling the alarm
To disable the alarm completely, choose standby mode and
press the ALARM 1 or ALARM 2 button (13/12).
Delayed Shut-Off
You can use the function for delayed power-off with radio
operation. The unit is switched off automatically when the
selected time is reached.
• Select the time after which the unit is switched off by
repeatedly pressing the SLEEP button (11). The following
selections can be made: 120, 110, 100, 90, 80, 70, 60, 50,
40, 30, 20 and 10 minutes. OFF = function is disabled.

Timer Function

You can use this function, for example, to keep an overview
of a specific cooking time. You can select between 180 to
10 minutes in steps of 10. The shortest time available to you is
5 minutes.
1. Press the TIME SET/COOK TIMER button (14) repeat-
edly. "C" and the set time will appear in the display, start-
ing with "C 180".
2. As soon as the set time has elapsed, a signal tone will
sound. Press any key to turn off the signal tone.
NOTE:
In order to stop the function ahead of time, press the TIME
SET/COOK TIMER button until "OFF" is shown in the
display.
) and
English
sound. The volume will increase slowly.
preset radio station will sound. The volume
will increase slowly.
37