Setting The Clock; Listening To The Radio; Alarm Function - AEG MRC 4151 Mode D'emploi

English
30

Setting the Clock

1. Turn off the device.
2. Press and hold the SLEEP / TIME SET button for
approx. 3 seconds. The hours start fl ashing.
3. Use the or button to adjust the hours.
4. Press the SLEEP / TIME SET button to confi rm.
5. Set the minutes with the
6. Confi rm the input with the SLEEP / TIME SET button.
NOTE:
The input is stored automatically within approximately
10 seconds when no button is pressed.

Listening to the radio

Scanning stations
1. Press the FUNC button to switch on the radio.
2. Press the FUNC button repeatedly, until the " "
symbol and the station frequency are shown in the
display.
3. When you press the
mentarily, the device changes to the next or the
previous station respectively.
NOTE:
If there is interference on the received station, try to
improve the reception by changing the position and
by unwinding or winding the antenna.
Presetting radio stations
1. Search for a station as described in "Scanning
stations".
2. Press and hold the MEM / PRESET button. The
pre-set location will be displayed. Select the pre-set
location with the
or the
3. Press the MEM / PRESET button to store the station.
Recalling preset radio stations
While in radio operation, repeatedly press the MEM /
PRESET button. One pre-set location after the other will
be called up.

Alarm function

General information
• Two alarm times can be set.
• You can only set, activate, and deactivate the alarm
times during standby.
• You'd like to be woken up by radio? Set the desired
station and the volume in advance.
• When the alarm time has been reached, the symbol
will blink for the fi rst, or respectively the second
alarm time.
MRC4151_IM - Size 138x210mm
or the button.
or the button mo-
button.
Setting the Alarm Time
1. Turn the device off.
2. Press and hold the ALARM button for approx. 3
seconds. The hours start fl ashing.
3. Set the hours with the
4. Confi rm the setting with the ALARM button.
5. Repeat points 3 and 4 to set the minutes.
6. Use the button to select how you want to be
woken up. Select from:
FM (the radio frequency received last is dis-
played)
n - 1 (nature sounds)
L - 1 (mood light)
b - L (buzzer + mood light)
F - L (radio + mood light)
n - L (nature sounds + mood light)
bp (buzzer)
Confi rm your selection with the ALARM button.
7. Use the button to select the nature sound for
waking you up. Select from:
Twittering of birds
Ocean waves
Frogs
Surf
Confi rm your selection with the ALARM button.
8. Use the button to select the colour of the mood
light. You can select from 7 different colour variations
and an automatic colour change.
Confi rm your selection with the ALARM button.
9. Now you can make the settings for the second alarm
time. Proceed as described in steps 3 to 8.
Activating / deactivating the alarm time
Press the ALARM button repeatedly.
With activated alarm time, the corresponding symbol
" "or „ " lights up in the display.
Shutting off of the alarm signal
To turn off the alarm until the next day, press the
FUNC button.
Snooze function (SNOOZE)
The automatically set alarm signal can be shut off for
approx. 9 minutes with the SNOOZE /
symbol " " will appear in the display.
Delayed shut-off
Would you like to fall asleep with radio music?
1. Press the FUNC button to switch on the radio.
2. Press the SLEEP / TIME SET button. The display
shows 90 (minutes).
3. Press the SLEEP / TIME SET button repeatedly to
reduce the time in steps of 10.
/ buttons.
button. The
30.03.16