Countdown Timer - AEG MRC 4117 Mode D'emploi

English
60

Countdown Timer

• In normal display mode (Fig. 2) press the MODE button (11) until the TIMER appears in
the display.
• Press the SET button (12). The hours start to flash. You can set the hours, minutes and
seconds in sequence using the UP (3) and DOWN (4) buttons. Confirm your entry each
time with the SET button. The current display to be set flashes in the display.
• Activate the function by pressing the UP button. The countdown is shown in the
display for approx. 30 sec. Then a short signal sounds and the normal display mode
appears. The countdown continues in the background.
• After the countdown timer ends, an alarm tone sounds for approx. 1 minute. Press the
SOUND button (1), to cancel the function.
NOTE:
Use the DOWN button to reset the countdown timer to zero.
Delayed Shut-Off
This function can be used optionally with one of the Nature Sounds or Melodies.
• In normal display mode (Fig. 2) press the TIMER button (13), to set the time delay
(10-60 Min.).
• Activate the function with the SOUND button (1). The unit automatically switches off
after the time has elapsed.
• This function can be cancelled with the SOUND button (1).
Cleaning
CAUTION:
Do not dip the appliance in water.
• Remove the plug before cleaning.
• Clean the appliance with a slightly humid cloth without any additives.