Technical Data - AEG KRC 4361 BT Mode D'emploi

English
38
Cleaning
CAUTION:
Do not dip the appliance in water.
• Remove the plug before cleaning.
• Clean the appliance with a slightly humid cloth without
any additives.
Troubleshooting
Fault Cause
Unit cannot Unit crashes and
be operated. "hangs".
No audio The device is not
signal via the registered with the
Bluetooth audio source.
connection
Volume too low
Device cannot Pairing does not
be connected. work
Audio source is
switched off
Bluetooth is switched
off at the audio
source.
Bluetooth version is
not supported.

Technical Data

Model: ..........................................................................KRC 4361 BT
Power supply: .....................................................220-240 V~, 50 Hz
Power consumption:................................................................2.5 W
Protection class: ................................................................................II
Power reserve battery: .................................. 1x 3 V, type CR 2025
Net weight: .............................................................................0.69 kg
Radio section
Frequency ranges: .................................. FM 87.5 ~ 108 MHz
Bluetooth
Bluetooth support: ........................................................V3.0 + EDR
Range: ..................................................................approx. 15 metres
Transmission frequency: ......................................2,402-2,480 GHz
Protocols: ....................................................................A2DP/AVRCP
We reserve the right to make technical and design changes
in the course of our ongoing product development.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
Solution
Disposal
Disconnect from the
mains for around
Meaning of the "Dustbin" Symbol
5 seconds. Then
Protect our environment: do not dispose of electrical equip-
switch the unit on
ment in the domestic waste.
again.
Check whether a Please return any electrical equipment that you will no longer
connection exists. use to the collection points provided for their disposal.
Reregister the device
This helps avoid the potential effects of incorrect disposal on
with the audio source,
the environment and human health.
if necessary.
This will contribute to the recycling and other forms of reutili-
Increase the volume
sation of electrical and electronic equipment.
on the device.
Increase the volume
Information concerning where the equipment can be dis-
on the audio source.
posed of can be obtained from your local authority.
Check whether the
audio source supports
the A2DP protocol.
Switch on the audio
source
Switch on the Blue-
tooth function in the
audio source.
Use a different play-
back unit.