hergom COMPACTO C-10 Instructions D'installation, De Service Et D'entretien page 19

3. DISMANTLING THE VENTILATOR
ATTENTION! Make sure that the appliance is unplugged before handling any electrical parts.
To change the ventilators proceed as follows:
Fig. 1
2. Loosen the tw o screws that
attach the ventilator support (fig 3).
4. Replace the ventilator and
put it back in position by
follow ing
instructions but in the reverse
order.
4. ELECTRICAL OUTLINE
A
Fig. 3
the above
Term. 50ºC
L
N
T
1. Take out ash pan "A".
(Figs 1 and 2)
Fig. 2
3. Remove the ventilator by
tilting it slightly (fig 4).
Disconnect the faston terminals
B
of the ventilator.
220V.
M.V.
50Hz.
22W.
220V.
50Hz.
M.V.
22W.
Fig. 4