Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN –
Original instructions
I. Parts List
II. Characteristics
I. PARTS LIST
II. CHARACTERISTICS
III. SAFETY INSTRUCTIONS
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire
and/or serious injury.
WARNING!
To reduce the risk of injury, read the instruction manual and understand the
machine before use.
WARNING!
When using electric tools basic safety precautions should always be followed to
reduce the risk of fire, electric shock and personal injury.
Save all warnings and instructions for future reference.
Keep this manual handy so that you may refer to it later whenever any questions arise. Always be
sure to include this manual when selling, lending, or otherwise transferring the ownership of this
product.
Symbols (Explanation of symbols appearing on the tool, if applicable)
Caution! Risk of injury and/or damage and/or deterioration of product in case of
non-compliance to safety requirements
CE Conformity
Do not dispose of this product with household rubbish.
Dispose of this product in the nearest recycle centre.
Please contact your local authority or local recycle centre for further information
for its safe disposal.
Replace immediately any broken or cracked safety glass.
Place the device more than 0,5m from a wall.
Class I: Connection to an earth is mandatory.
This electrical equipment is designed for indoor use only.
Warning! Electric shock hazard!
This machine contains electrical equipment that can give rise to a risk of electric shock.
Do not aim the eyes or face of people and animals.
Do not direct the light beam to the eyes.
Disconnect product from its power source before maintenance, cleaning or any
intervention on product; or when you do not use product.
Disconnect product from its main power source, if product, power cable, or
extension cord is damaged or cut during operation.
Unplug product by pulling the plug. Do not pull the cable.
III. Safety instructions
IV. Getting Started
See Fig. 1
See Table 1
V. Operation
VI. Maintenance and Storage
Page 9 / 21
Publicité
Table des Matières
